Why Our Baths and Showers Are Best

This is why our Baths and Showers are Stronger, Tougher and built to last.

Please read the Shower section below the Bath pictures.

The most important part of any Walk in Bath is the Frame.  It needs to be welded together, not botled as a bolted frame will move, substantial in size and a good quality.

All our Baths are built on a solid welded Stainless Steel Frame. The Frame will not RUST and is not bolted together like our competitors. Ours is welded. A bolted Frame may allow the Bath to twist and eventually it may leak through the door.

The next most important aspect is the Walk in Bath Design.  All our Baths are manufactured as below.

There are THREE layers of high gloss Gelcoat. Most Walk in baths only have one.

There are FOUR layers of high-efficiency glass-fibre used to build up the thickness of the whole body. Most Walk in Baths have only two layers.
 
We also thicken the main supporting areas  around the corners and around the back of the seat where we use FIVE layers of high-efficiency glass-fibre and we use SIX layers in the floor area.

All the Air Jet and Water Jet holes are re-enforced and we apply a section of marine ply glass-fibre to the underside of the base.

The Stainless Steel Frame will prevent any rusting and ensure the rigidity of the Walk in Bath.  Please note the hygienic bidet cutaway in the photo.

The photos below show the fiberglass body, Air Manifold and Jet attachment, Blower and Stainless Steel plate and please note the general tidiness and attention to detail of the whole system.

The Soaker models are all built to the same high standard. 

No other company can offer you our certificated designs and models.

A full survey will only take 90 minutes and we can ascertain that your chosen model will fit and you are on your way to a luxurious bath.

 

 

 The Wibtrac Royal Shower Range

Our Shower range are all Pod configuration offering the latest designs and using Pod manufacturing methods. Now is your chance to purchase the same type of shower and construction that are installed in the disabled bathrooms in Hotels, Universities and Care Homes.They really have to stand the test of time. The Rolls Royce of Walk-in-Showers. 

Models available.

• 1200mm or 900mm L x 750mm W x 1960mm Unit.

   800mm x 800mm X 1960mm H Corner Unit.

   858mm or 950mm x 1960mmH Quadrant Unit.

Standard Features Include.

• Pod design to include sides and rear.

• Designed to fit into your existing bath space

• Quadrant, Corner, Bi-Fold and Sliding Door Alcove      configuration.

 • No need for expensive tiling or digging into the floor.

• Adjustable extension panel to fill in the gap after removing your existing bath.

• Water control is a single-handle anti-scald valve for ease of use and safety.

• Removable handheld 3D showerhead with hose and chrome-plated slide bar.

• One 18 inch grab bar fitted to your requirements.  (More if needed)

• Removable optional chair with supporting arms.

• Possible to install in one day.

• Complete Bathroom refit service available.

• Watertight lifetime guarantee.

• Installed by fully trained qualified installers.

This is where your savings come in.  As there is no tiling involved, no need to cut into the floor to run the waste and no need to replace the U bend and associate pipe work, we can normally fit our showers in ONE day. If a pump is required it may be two

No other company can offer you our design and models.

A full survey will only take 90 minutes and we can ascertain that your chosen model will fit and you are on your way to a luxurious shower.

Click on the Shower link on the home page.